Machined Geometry
Shaped pockets, locating surfaces and mounting holes.
Machined tooling plates with shaped locating pockets, mounting holes and seating surfaces. Define the workpiece contact and clamping arrangement together with the fixture base.
Upload CAD Drawings for a Quote
Shaped pockets, locating surfaces and mounting holes.
Confirm workpiece seating, clamp access and locating datums.
Identify workpiece-contact surfaces, clearance pockets and locating elements. Show the clamp positions and available access.
Dimension the fixture base interface and distinguish it from the workpiece datums. A tooling reference does not establish a finished fixture's load capacity.
Review pocket machining and fixing features from the locating datum system. Plate support, pocket access and the machining sequence should preserve the working faces used in the completed fixture.
For machined tooling plate, specify the alloy, condition and finish on the drawing. Review the finished interfaces, treatment sequence and inspection requirements before selecting this candidate material.
For machined tooling plate, specify the alloy, condition and finish on the drawing. Review the finished interfaces, treatment sequence and inspection requirements before selecting this candidate material.
For machined tooling plate, specify the alloy, condition and finish on the drawing. Review the finished interfaces, treatment sequence and inspection requirements before selecting this candidate material.
For machined tooling plate, specify the alloy, condition and finish on the drawing. Review the finished interfaces, treatment sequence and inspection requirements before selecting this candidate material.
These grades are engineering selection candidates, not a statement of stock availability or verified capability for every material condition. Material, heat treatment and inspection requirements are subject to factory confirmation against the drawing.
Explore CNC Metals & MaterialsUse the dimensioned drawing to define these requirements. Photographs illustrate visible geometry; they do not establish a standard size, material grade or performance rating.
Pockets and datums can establish a part's position during a defined operation. Review clamping and access alongside the workpiece drawing.
A tooling plate may support several components during assembly. Define how each item is located and retained.
Prototype tooling can test access and seating before a repeated process is established. State any separately required functional or load trial.
Relate the workpiece datums to the fixture mounting references rather than only to plate edges.
Review pocket radii, deep recesses and access for both machining and clamps.
Specify finish and edge treatment where surfaces contact the workpiece.
Agree pocket, datum and mounting inspection separately from validation of the complete fixture.
Send the CAD model and project requirements for manufacturing review.
Upload CAD Drawings for a Quote