01 / CNC Metals
Aluminum combines low mass, practical machinability and broad finishing flexibility for housings, brackets, fixtures and structural components.
Get a Quote
02 / Material Characteristics
Qualitative selection data is shown because grade, condition, product form and supplier documentation control any numeric value used for design.
Manufacturing compatibility
03 / Common Grades & Specifications
Use the exact designation, governing product standard, condition and supplier record required by the drawing. Generic family names are not substitution approval.
| Grade or type | Specification & condition | Key distinction | Manufacturing & application fit |
|---|---|---|---|
| 6061-T6AA 6061-T6 | Aluminum Association wrought-alloy designation; product standard must match the drawingT6 temper | A versatile engineering alloy commonly selected for housings, brackets and general structural parts. | CNC milling · CNC turning · Anodizing after compatibility reviewHousings · Brackets · Fixtures |
| 7075-T6AA 7075-T6 | Aluminum Association wrought-alloy designation; product standard must match the drawingT6 temper | A higher-strength alloy often considered for more demanding structural components, with different corrosion and finishing considerations. | CNC milling · CNC turning · Controlled finishingStrength-sensitive brackets · Structural components |
| 6061-O | 6061 wrought-alloy designation; governing product standard must match the drawingO / annealed; stock form and thickness to be confirmed | Annealed 6061 is a distinct condition from T6 and T651. Confirm the temper rather than treating all 6061 stock as interchangeable. | CNC milling · CNC turning after stock reviewDrawing-specified enclosures · Brackets and custom components |
| 6061-T651 | 6061 wrought-alloy designation; governing product standard must match the drawingT651; product form and acceptance criteria to be confirmed | Specify the T651 condition explicitly. Substitution with annealed 6061-O or another temper requires engineering review. | CNC milling · CNC turningEnclosures · Plates and structural components |
| 6063 | 6063 wrought-alloy designation; governing product standard must match the drawingTemper and product form to be specified | A 6000-series alloy supplied in multiple tempers. Strength and finishing suitability require condition-specific review. | CNC machining after stock and temper reviewDrawing-defined profiles · Custom machined components |
Published supplier or standards-body values remain reference data, not guaranteed HERUIYUN machining results. Confirm the grade, condition, test method and acceptance criteria for the quoted project.
04 / Material & process review
Upload the CAD model and drawing with the exact material designation, quantity, finish and service requirements. Availability and manufacturing feasibility will be confirmed for the project.
Get a Quote