01 / CNC Metals
Brass supports detailed turned and milled parts where machinability, electrical behavior, corrosion resistance and a decorative metallic finish are useful.
Get a Quote
02 / Material Characteristics
Qualitative selection data is shown because grade, condition, product form and supplier documentation control any numeric value used for design.
Manufacturing compatibility
03 / Common Grades & Specifications
Use the exact designation, governing product standard, condition and supplier record required by the drawing. Generic family names are not substitution approval.
| Grade or type | Specification & condition | Key distinction | Manufacturing & application fit |
|---|---|---|---|
| H62 | Supplier grade or material-system datasheet controlsCondition, formulation or build state must be stated | A brass designation used in Chinese specifications; confirm temper and product form on the drawing. | CNC turning · CNC milling · Polishing · Compatible platingElectrical contacts · Threaded fittings |
| Free-machining brass families | Supplier grade or material-system datasheet controlsCondition, formulation or build state must be stated | Grades developed for efficient turning, subject to regional composition and compliance requirements. | CNC turning · CNC milling · Polishing · Compatible platingElectrical contacts · Threaded fittings |
| Low-lead or lead-free variants | Supplier grade or material-system datasheet controlsCondition, formulation or build state must be stated | Options considered where product or market requirements restrict lead content. | CNC turning · CNC milling · Polishing · Compatible platingElectrical contacts · Threaded fittings |
| H59 | H59 designation / composition: GB/T 5231-2022; governing product standard requiredTemper and stock form to be specified | Copper-zinc brass requiring confirmed chemistry and compliance requirements. Do not assume equivalence to a leaded free-cutting grade. | CNC turning after material review · CNC millingCustom fittings · Drawing-specified mechanical components |
| H65 | H65 designation / composition: GB/T 5231-2022; governing product standard requiredTemper and stock form to be specified | Copper-zinc brass with mechanical requirements dependent on temper and product form. Confirm the supplied condition before machining. | CNC turning after material review · CNC millingCustom connectors · Drawing-specified components |
Published supplier or standards-body values remain reference data, not guaranteed HERUIYUN machining results. Confirm the grade, condition, test method and acceptance criteria for the quoted project.
04 / Material & process review
Upload the CAD model and drawing with the exact material designation, quantity, finish and service requirements. Availability and manufacturing feasibility will be confirmed for the project.
Get a Quote